← All Tools

Condensate Yield Calculator

Calculate condensate-gas ratio (CGR), gas-oil ratio (GOR), barrel of oil equivalent (BOE), and daily revenue for gas-condensate wells.

Production Rates

Pricing

CGR = Condensate / Gas × 1000  [bbl/MMcf]

GOR = Gas / Condensate × 1000  [scf/bbl]

BOE = Condensate + Gas / 6  [boe/d]

Condensate-Gas Ratio (CGR)

--

Gas-Oil Ratio (GOR)

--

BOE Rate

--

Gas Classification

--

Revenue Breakdown

Gas Revenue

--

Condensate Revenue

--

NGL Revenue

--

Total Daily Revenue

--

Production Summary

Total Fluid (bbl/d)

--

Water Cut

--

Monthly Revenue

--

Annual Revenue

--

How this was calculated

CGR: Condensate-gas ratio = condensate rate (bbl/d) / gas rate (Mcf/d) * 1000 = bbl/MMcf. Typical range: 5-300 bbl/MMcf.

GOR: Gas-oil ratio = gas rate (Mcf/d) / condensate rate (bbl/d) * 1000 = scf/bbl. Inverse of CGR.

BOE: Barrel of oil equivalent = condensate (bbl/d) + gas (Mcf/d) / 6. The factor of 6 is the standard energy-equivalent conversion (6 Mcf gas ~ 1 bbl oil).

Gas classification: Dry gas: CGR < 10 bbl/MMcf. Wet gas: CGR 10-50. Gas condensate: CGR 50-300. Volatile oil: CGR > 300.

NGL yield: Natural gas liquids recovered at the processing plant, typically 10-50 bbl/MMcf for rich gas.

Related Tool

Well Economics Calculator

Calculate NPV, IRR, and breakeven price for your well.

Open Well Economics Calculator →

Related Tool

PVT Calculator

Estimate PVT properties: Pb, Rs, Bo, and fluid correlations.

Open PVT Calculator →

Need help with gas-condensate reservoir management, production optimization, or economic analysis?

Book a free strategy call →

Understanding Condensate Yield and Gas Classification

The condensate-gas ratio (CGR) is a key parameter that characterizes gas-condensate reservoirs and determines their economic value. It represents the volume of liquid hydrocarbons (condensate) recovered per unit of gas produced. A higher CGR means more valuable liquids per unit of gas, significantly impacting well economics since condensate typically sells at a premium to dry gas.

Gas classification based on CGR helps engineers understand the reservoir fluid system. Dry gas reservoirs (CGR below 10 bbl/MMcf) produce essentially no liquids. Wet gas systems (10-50 bbl/MMcf) produce some liquids at the surface but remain single-phase in the reservoir. Gas-condensate reservoirs (50-300 bbl/MMcf) can experience retrograde condensation below the dew point, where liquid drops out in the reservoir, reducing productivity and recoverable liquids. Volatile oil systems (above 300 bbl/MMcf) behave more like oil reservoirs with high gas content.

BOE (barrel of oil equivalent) provides a common unit for comparing oil and gas production. The standard conversion uses 6 Mcf of gas = 1 barrel of oil on an energy-equivalent basis. However, the economic equivalence depends on current commodity prices and may differ significantly from the energy equivalence.

All calculations run entirely in your browser. Built by Groundwork Analytics. Get in touch or email info@petropt.com.

Disclaimer: These calculations are for screening and educational purposes only. Results should be verified against detailed simulation or field measurements before making operational decisions. Groundwork Analytics assumes no liability for decisions made based on these results.